(Also known as: Clarified hydrophobic extract of neem oil; neem oil extract; CHENO)
Hazard alerts
The following Pesticide Hazard Tricolour (PHT) alerts are based on the data in the tables below. An absence of an alert does not imply the substance has no implications for human health, biodiversity or the environment but just that we do not have the data to form a judgement. The alerts for Highly Hazardous Pesticides (HHPs) are based on applying the FAO/WHO (Type 1) and the PAN (Type II) criteria to PPDB data. Further details on the HHP indicators are given in the tables below. Neither the PHT nor the HHP hazard alerts take account of usage patterns or exposure, thus they do not represent risk.
Example manufacturers & suppliers of products using this active now or historically
Certis Biologicals
Example products using this active
Formulation and application details
Usually supplied as an emulsifiable concentrate and applied as a spray
Commercial production
Clarified hydrophobic extract of neem oil is produced commercially by refining crude neem oil through extraction, filtration, and clarification steps. First, neem seeds are graded, cleaned, and mechanically pressed to obtain crude oil. This crude oil contains water, waxes, and biologically active limonoids such as azadirachtin. It then undergoes solvent extraction and water removal processes to eliminate impurities and stabilize the oil. Finally, the extract is passed through advanced multi stage filtration systems that remove azadirachtin and other residues, yielding a high purity, clarified oil with improved stability and reduced phytotoxicity.
Impact on climate of production and use
There is currently no specific publicly available data quantifying the GHG emissions from the commercial production of neem oil extract. However, since it is derived from natural neem seeds through mechanical pressing, solvent extraction, and purification, rather than synthetic chemical synthesis, its production is generally considered to have a lower environmental footprint.
ENVIRONMENTAL FATE
Property
Value
Source; quality score; and other information
Interpretation
Solubility - In water at 20 °C at pH 7 (mg l⁻¹)
-
-
-
Solubility - In organic solvents at 20 °C (mg l⁻¹)
-
-
-
Melting point (°C)
-
-
-
Boiling point (°C)
-
-
-
Degradation point (°C)
-
-
-
Flashpoint (°C)
70
E4 E = Manufacturers safety data sheets 4 = Verified data
-
Octanol-water partition coefficient at pH 7, 20 °C
P
-
-
-
Log P
-
-
-
Fat solubility of residues
Solubility
-
-
-
Data type
-
-
-
Density (g ml⁻¹)
0.9
Q3 Q = Miscellaneous data from online sources 3 = Unverified data of known source
-
Dissociation constant pKa) at 25 °C
-
-
-
-
Vapour pressure at 20 °C (mPa)
-
-
-
Henry's law constant at 25 °C (Pa m³ mol⁻¹)
-
-
-
Volatilisation as max % of applied dose lost
From plant surface
-
-
-
From soil surface
-
-
-
Maximum UV-vis absorption L mol⁻¹ cm⁻¹
-
-
-
Surface tension (mN m⁻¹)
-
-
-
Degradation
Property
Value
Source; quality score; and other information
Interpretation
General biodegradability
-
Soil degradation (days)
DT₅₀ (typical)
-
-
-
DT₅₀ (lab at 20 °C)
-
-
-
DT₅₀ (field)
-
-
-
DT₉₀ (lab at 20 °C)
-
-
-
DT₉₀ (field)
-
-
-
DT₅₀ modelling endpoint
-
-
-
Note
-
Soil mineralisation
Aerobic (at 20 °C)
-
-
-
Anaerobic (at 20 °C)
-
-
Dissipation rate RL₅₀ (days) on plant matrix
Value
-
-
-
Note
-
Dissipation rate RL₅₀ (days) on and in plant matrix
Value
-
-
-
Note
-
Aqueous photolysis DT₅₀ (days) at pH 7
Value
-
-
-
Note
-
Aqueous hydrolysis DT₅₀ (days) at 20 °C and pH 7
Value
-
-
-
Note
-
Water-sediment DT₅₀ (days)
-
-
-
Water phase only DT₅₀ (days)
-
-
-
Sediment phase only DT₅₀ (days)
-
-
-
Air degradation
As this parameter is not normally measured directly, a surrogate measure is used: ‘Photochemical oxidative DT₅₀’. Where data is available, this can be found in the Fate Indices section below.
Decay in stored produce DT₅₀
-
Soil adsorption and mobility
Property
Value
Source; quality score; and other information
Interpretation
Linear
Kd (mL g⁻¹)
-
-
-
Koc (mL g⁻¹)
-
Notes and range
-
Freundlich
Kf (mL g⁻¹)
-
-
-
Kfoc (mL g⁻¹)
-
1/n
-
Notes and range
-
pH sensitivity
-
Known metabolites
None
ECOTOXICOLOGY
Terrestrial ecotoxicology
Property
Value
Source; quality score; and other information
Interpretation
Mammals - Acute oral LD₅₀ (mg kg⁻¹)
> 5000
E4 E = Manufacturers safety data sheets 4 = Verified data
Rat
Low
Mammals - Short Term Oral NOAEL (mg kg⁻¹ bw d⁻¹)
-
-
-
Mammals - Long Term (Chronic) Oral NOAEL (mg kg⁻¹ bw d⁻¹)
-
-
-
Birds - Acute LD₅₀ (mg kg⁻¹)
> 2150
E3 E = Manufacturers safety data sheets 3 = Unverified data of known source
Lewis, K.A., Tzilivakis, J., Warner, D. and Green, A. (2016) An international database for pesticide risk assessments and management. Human and Ecological Risk Assessment: An International Journal, 22(4), 1050-1064. DOI: 10.1080/10807039.2015.1133242
Your use of this website and its various databases is subject to the terms detailed in the University of Hertfordshire’s copyright and IPR statement that can be found at https://www.herts.ac.uk/about-us/legal.
In addition, your use of this website and its various databases is subject to the terms of this additional Copyright Statement and the database Conditions of use document.
Unless explicitly stated otherwise, the content of this website and databases are owned and controlled by the University of Hertfordshire. Site content, including its selection and arrangement, is owned by the University of Hertfordshire and is protected by copyright and other laws.
Except as otherwise expressly permitted under copyright law or within the database Conditions of Use document, the content of this site may not be copied, reproduced, republished, downloaded, posted, broadcast or transmitted in any way without first obtaining the University of Hertfordshire’s written permission.
By using our databases the user is deemed to have agreed to comply with all of the terms and conditions as described above and within all relevant documentation.
Ecotoxicity
Warning:
